40601 Media Handler MDH: Timeout, TEB did not trigger sensors The teb has had a timeout trying to accomplish it's current task. Either the both sensors has not been tripped, or the TEB has not moved. If the bender has moved then check for a bad sensor, otherwise check to make sure that the TEB solenoid is working. Make sure the air supply is on, and that the TEB initialized properly. This error is reported. The following could cause this error: TEB being blocked by some external part bad sensors improper air supplied to the machine missing cable to solenoid block bad bender solenoid door loop not closed or overidden abort switch is on PS2 power not on 08-JAN-2001 Automated conversion to new FW1 error template. ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:28 2008 PST